DYMOT ENGINEERING COMPANY
11 Derrick Road
Spartan
Kempton Park
South Africa
+27 11 970 1920
sales@dymot.co.za
www.dymot.co.za
Copyright © Dymot Engineering Company
BATTERY CHANGING SYSTEMS
GENERAL INFORMATION
The Dymot Battery Changing Systems are available in kit form and can be fitted to any battery rack.
The kit consists of four parts:
- Firstly racks for 42 cell and 60 cell batteries.
- Secondly a system of two or three jacks (depending on the size of the battery) for quickly adjusting the height or the level of the battery rack to suit the loco simply by turning one handle.
- Thirdly a winch for pulling the battery from the loco to the rack or vice versa. This winch clips either to the rack or the side of the loco depending on the direction of pull.
- Fourthly winch retaining clevices which must be welded to the loco and the battery racks.
FEATURES
- Low cost.
- Safety.
- Efficiency.
- No power connections required.
- Simplicity of operating, maintenance and installation.
- Gravity loaded ratchet pawl for extra safety.
NOTE: The winch is designed to slip into fabricated steel clevises which must be welded to the loco and the battery charging racks. These clevises are purchased separately.
DOWNLOAD BROCHURE
| Useful Information on Winches |
| DYMOT Products in the World |
| Safety Hand Winches |
| Plumbob Winches |
| Worm Winches |
| 300S Hand Winch |
| 400S Hand Winch |
| Automatic Tension Control EGT DOL |
| Automatic Tension Control BTS VFD |
| Electrical Panels |
| Electrical Readout Panels |
| Loadcell Two Wire Loop Powered |
| Loadcell Four Wire Tensile Link |
| Battery Changing System |
| Builders Hoists |
| Conveyor Take-Up Trolley |
| Engineering Services |
| Grease Pumps |
| Builders Hoist Winch MK1 - 500kg |
| Builders Hoist Winch MK2 - 1 TON |
| Gallery Winches |
| Gallery Braked Capstans |
| Gallery Sheaves |
| Gallery Panels |
| Gallery Hydraulics |
| Gallery Project & Site |