DYMOT ENGINEERING COMPANY
11 Derrick Road
+27 11 970 1920
Copyright © Dymot Engineering Company
A light small economical multi-purpose winch with an automatic brake system. No adjustments required.
OPERATION AND MAINTENANCE
Due to the automatic safety devices incorporated in the design of the range of safety winches the operation is extremely simple. Raising of the load is achieved by winding the handle in a clockwise direction and lowering by winding anti-clockwise.
The ratchet must never be disengaged.
The rope must be reeled onto the drum by winding the handle in a clockwise direction, and under no circumstances must this direction be reversed.
A minimum of 4 turns of rope must always be on the drum to ensure no slipping or releasing of the rope.
The rope is threaded through the drum, doubled back into the locking hole and pulled tight.
This tight bedding locks the rope to the drum.
|Useful Information on Winches|
|DYMOT Products in the World|
|Tension Control & Panels|
|Barge Positioning Winches|
|High Mast Winches|
|Lay On - Lay Off Winches|
|Belt Pulling Winches|
|DSB - Compact Rope Hoist|
|Endless Rope Systems|
|Motorised Hand Winches|
|Take-Up Winches with Overload Protection|
|Safety Hand Winches|
|300S Hand Winch|
|400S Hand Winch|
|Automatic Tension Control EGT DOL|
|Automatic Tension Control BTS VFD|
|Electrical Readout Panels|
|Loadcell Two Wire Loop Powered|
|Loadcell Four Wire Tensile Link|
|Battery Changing System|
|Conveyor Take-Up Trolley|
|Builders Hoist Winch MK1 - 500kg|
|Builders Hoist Winch MK2 - 1 TON|
|Gallery Braked Capstans|
|Gallery Project & Site|